$0.00 Cart
QUOTE REQUEST
CROSS REFERENCE GUIDE
ACCOUNT
CART

Oil Filters

Warrior Filtration carries oil filters that are built of the highest quality materials and workmanship.

Specific filtration levels are obtained through the exclusive use of high-grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical

In the compressor system, the oil itself must be filtered on a regular cycle to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin-on form, which then ensures that all of the oil is cleaned as it moves through the filter.

Filtering in 5–25 micron range (depending upon application), it is again, the depositing of oil-borne contaminants over time, that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil.

See all our Oil Filters below or Contact Us if you have a question.

Available Oil Filter Products

Search by OEM
Filters Sort results
Reset Apply
OEM Name
OEM Number
Warrior Part Number
ABAC AMERICAN
2236109228
WFLS-75028
ABAC AMERICAN
9056491
WFLS-60025
ABAC AMERICAN
9057492
WFLS-53000
ABAC AMERICAN
9057423
WFLS-33000
ADICOMP
40200007
WFLS-33000
ADICOMP
40200002
WFLS-75028
ADICOMP
40200005
WFLS-53000
AERZENER
123396/1
WFLS-43320
AIRTECH
ATOF-51348
WFLS-60025
AIRTECH
ATOF-51452
WFLS-44000
AIRTECH
ATOF-51820
WFLS-43320
ALMIG
572.00221
WFLS-51015
ALMIG
572.03291
WFLS-08928
ALMIG
572.13145
WFLS-33015
ALUP
172.00221
WFLS-51015
1 2 … 27

Disclaimer

This contents of this website represent accurate product details to the best of our knowledge. These filters are replacement parts for the original manufacturer. Please verify cross reference and other product information against the  specifications of your manufacturers and customers prior to requesting a quote.

Cross Reference Guide

Need a part but aren't sure where to find it? Search our product catalog by Warrior Part Number, OEM Number, or OEM to find exactly what you're looking for.

GET STARTED

Browse By Category

Air Filters

Small Engine Filters

Oil Filters

Turbine/Dust Collector Filters

Compressed Air Line Filters

Air/Oil Separators

Spread the word

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest

Get in Touch

LOCATION

CONTACT INFORMATION

© 2021 Warrior Filtration, LLC.

HOW TO USE OUR SITE

Warrior Filtration’s website makes it easy to request quotes on our sizable catalog of quality filtration products. If this is your first time here, take a look at the steps below to see the process outlined:

Browse Our Parts List

You can use our extensive Cross Reference Guide to quickly find your part by either its Warrior Part Number or OEM Number:

You can also “drill down” to specific categories using our category links around the site:

Enter Your Desired Part Quantity

Once you land on the page for your part, enter your desired quantity and hit “Add to Quote.” Continue to do this for multiple products (if needed), to build up a complete quote. You can check your quote request’s contents at any point by clicking the green “quote cart” in the top-right corner of the website header.

Finalize Your Quote

When you have finished outlining the parts you wish to quote, click the “Finalize Quote” button on the Quote Cart page. You’ll be taken to a form to provide us additional contact and company information to finalize your quote request. You’ll also have the option to create an account as you finalize the quote.

Creating an account is optional, but doing so provides you with the ability to set multiple shipping addresses, define lists of your favorite parts, and refer back to previous quote requests, all of which will save you time for repeat orders.

Once you have submitted your quote request, we will reach back promptly with a formal quote for your review. We look forward to working with you!

Already Know Your Part Numbers?

If you’re already familiar with the part numbers you need to receive a quote on, you save even more time by using our “Quote Request” bulk part selector form. Just enter your Warrior Part Number (or OEM Number), along with your quantity, on each line to build up your quote request in no time!

Once you have selected all of your parts with this form, you’ll be taken to the “Finalize Your Quote” page to complete the process as usual.

Need Assistance?

If you need some help identifying the products you need, just visit our Product Quote Assistance form. We can help you match the products to their part numbers to finalize your quote.